Atomic Clock Time References

Atomic time clocks provide a highly stable and accurate time reference. They are extremely complex and expensive systems that are impractical to be used in an everyday environment. Atomic clocks are generally only found in National Standards and National Physics Laboratories. Commercial time references are generally based on either GPS or National Time and Frequency radio broadcasts. This means that by utilising relatively low-cost GPS or radio receivers, accurate time is freely available to all.

This article discusses a number of atomic timing references and how they can be used to provide synchronisation of computer equipment and networks.

National Radio time and frequency broadcasts transmit accurate time and date information from a radio transmitter. A number of radio time and frequency broadcasts are available, such as: WWVB, DCF-77 and MSF-60. The time and frequency radio transmissions are referenced to a precise atomic clock time source. By utilising a relatively low-cost radio receiver PC and NTP server systems have access to precise timing information. Additionally, radio antennas can generally obtain a good signal indoors close to the host time server making installation very straight-forward. However, radio broadcasts have a finite range and are generally only available to a regional audience.

The DCF-77 radio time and frequency transmission is broadcast from Mainflingen, near Frankfurt, Germany. The transmission is a long-wave signal broadcast at 77.5 kHz. T-Systems, a division of Deuche Telecom maintain the radio transmitters. The time and frequency broadcast is referenced to precise atomic clocks located at the German National Standards Laboratory (PTB) in Brunswick. The DCF-77 signal can be received using a low-cost radio receiver and when decoded provides a precise timing reference for computer time servers.

The MSF radio time and frequency transmission is broadcast from Anthorn, Cumbria in the United Kingdom. The signal is broadcast as a long-wave radio transmission at 60 kHz. The transmitted time and date information is referenced to atomic clocks sited at the UK National Physics Laboratory. The transmitters are maintained by VT Communications.

WWVB is the US National Time and Frequency radio broadcast. It is a 60 kHz transmission broadcast from Fort Collins, Colorado. The transmission is referenced to atomic clocks installed at the US National Institute of Standards and Technology (NIST). WWVB provides a time and frequency reference to within 100 microseconds of the correct time and has been in operation for 45 years.

The GPS system is a Global Positioning System intended for worldwide navigation. The GPS system consists of 24 satellites in high orbit. By utilising triangulation, the GPS system can provide highly accurate positioning information anywhere on Earth. In order to calculate position, each orbiting satellite has an on-board atomic clock timing reference. Atomic time is constantly transmitted from each satellite and is available to a GPS receiver. The GPS signal is available subscription-free anywhere on the face of the Earth. Bu using relatively low-cost GPS antenna and receiver equipment precise time and date information can be made available to time server and computer network equipment. A GPS antenna does however need to be installed ideally on a rooftop with a good 360-degree view of the sky.

The Network Time Protocol (NTP) is the standard means of achieving network time synchronisation. NTP is used to distribute accurate time around the Internet and other computer networks. The standard NTP server distribution for LINUX\UNIX is available free-of-charge under the GNU public licence and provides reference clock drivers for many radio and GPS receivers. Radio and GPS receivers are available with serial or USB ports that can interface to a PC or NTP time server to provide an accurate external timing reference. Depending on time source, NTP servers can synchronise to within a few microseconds of the correct time. Depending on network traffic they can synchronise network time clients to within a few milliseconds.

To summarise, there are a number of national and global time and frequency references available for synchronising computers and computer networks. Many time sources provide a highly accurate time reference that can provide synchronisation to within a fraction of the correct time. By utilising radio and GPS references, accurate time is available without the expense and complexity of atomic clocks.

Article Source: http://www.rightbiz.com

D. Evans is a technical author with many years experience in the field of NTP time server and atomic clock time synchronisation systems to ensure accurate network time. Click here to find out more about atomic clock and NTP time server systems.

Please Rate this Article

Not yet Rated